Inverter CO2 Mig/Mag welder MIG-200

Inverter CO2 Mig/Mag welder MIG-200, IGBT technology, 220V,

I.NBC SERIES WELDING MACHINE WITH CCC&CE APPROVED

 

  Model : NBC-200Y/250Y/250F

 

II.MAIN TECHNICAL PARAMETER

  

MODEL                          ITEM	NBC-200Y	NBC-250Y	NBC-250F
Input power voltage,Frequency (V,HZ)	AC380(THREE PHASES)±10%   50/60 HZ
Rated input power capacity (KVA)	8	12	12
No-load voltage (V)	42	42	42
Output current adjustment range (A)	50-200	50-250	50-250
Rated output voltage adjustment range (V)	16.5-24	16.5-24	16.5-24
Rated duty cycle (%)	60	60	60
Efficiency (%)	85	85	85
Pover factor (COSφ)	0.93	0.93	0.93
Type of wire feeder	INSIDE	INSIDE	OUTSIDE
Gas post-flow time (S)	1±0.5	1±0.5	1±0.5
Wire feeding speed(M/MIN)	2.5-13	2.5-13	2.5-13
Diameter of coil (MM)	270	270	270
Earth cable (MM2)	≥2.5	≥2.5	≥2.5
Diameter of welding wire (MM)	0.8/1.0	0.8/1.0	0.8/1.0
Welding thickness (MM)	≥0.8	≥0.8	≥0.8
Weight (KG)	34	35	24
Measurement (MM)	655x295x610	655x295x610	480x205x355
Insulation class	F	F	F
Protection class	IP23	IP23	IP23

III.STANDARD ACCESSORY LIST&PICTURE

    1. A set of welding torch.

 

   2. A set of earth clamp with fast coupling device.

 

   3.Two meters of gas carrying hose with two clips.

   

 

 

1.A set of welding torch.

 

 2. A set of earth clamp with fast coupling device.

 

 3.Ten meters of gas carrying hose with two clips.

 

 4.Ten meters of 7x1 control wire with 7 core-plug.

 

 5. Ten meters of welding cable with connectors.

 

 6. A set of wire feeder.

 

 

 

IV.CHARACTERISTIC

 

  1.Integrate wire feeder with power together.

 

    2.Easy operation, high speed in welding without any  interruption, high successfully Rate of arc-starting.

 

    3.Little splash, deep welding pool,beautiful welding seam, heat-proof and Spilt-proof.

 

    4.Suitable for mild steel, low carbon steel, alloy steel etc and suitable for welding the thin-palte(0.8MM).